Home Admission Point Scores CUT APS: How to Calculate CUT Admission Point Score 2023/2024

CUT APS: How to Calculate CUT Admission Point Score 2023/2024

0

This is an article that contains a guide to calculating your CUT APS (Admission Point Score) for the 2024 academic year. We have adopted the selection criteria of various courses for the coming admission year. 

Central University of Technology, CUT Admission Points Score

Among the many requirements needed for admission into the Central University of Technology, CUT, the admission point score is the most necessary. For those of us who might be asking what an admission point score means. It is simply an accumulation of grade points needed for admission into the University. The CUT APS for various courses is determined by using a constant calculation formula which will be stated in this article. 

Every year, the management of the Central University of Technology publishes a standard Admission Point Score for all courses which can be used as a constant in determining the selection of prospective students into undergraduate programmes. Bear in mind that the CUT APS is only used as a selection criteria for undergraduate admission and not for postgraduate studies. 

Kindly check below for the steps on how to calculate the Central University of Technology Admission Point Score for the 2024 academic year. 

HOW TO CALCULATE THE CENTRAL UNIVERSITY OF TECHNOLOGY, CUT ADMISSION POINT SCORE 

The formula used in calculating the CUT admission point score is a summation of all your six (6) best high school subjects (excluding Life Orientation), the total percentage you get is your admission point. Kindly check below for an illustration and example of the APS. 

How to calculate your Admission Point Score (APS)

CUT offers programmes in a wide field of interest
Subject codes for tables below

M

Mathematics

ML

Mathematic Literacy

PS

Physical Sciences

LS

Life Sciences

E

English

LO

Life Orientation

L

Languages

A

Accounting

AS

Agricultural Sciences

E

Economics

BS

Business Studies

IT

Information Technology

CS

Consumer Sciences

HS

Hospitality Studies
Faculty of Engineering and Information Technology

Programme

Minimum Level of Achievement in Subject

1 (0-29%) | 2(30-39%) | 3 (40 -49%) | 4 (50-59%) | 5 (60-69%) | 6 (70-79%) | 7 (80-100%)

Life Orientation will be given a score of 1 point. See Admission Points

Minimum  Points

M

ML

PS

LS

E

LO

L

A

AS

E

BS

IT

 

Computer networking

3

6

4

4

3

27

Engineering: Civil

4

4

4

4

4

28

4

4

4

4

4

27

Engineering: Construction

4

4

4

4

4

4

4

4

4

4

4

27

Engineering: Construction Management

4

4

4

4

4

4

4

4

4

4

4

32

Engineering: Computer Systems

4

4

4

4

27

Engineering: Electrical (Light Current)

4

4

4

4

27

Engineering: Electrical (Heavy Current)

4

4

4

4

27

Engineering: Mechanical

4

4

4

4

27

4

4

4

27

5

4

4

32

Engineering: Quantity Surveying

4

4

4

4

4

4

4

4

4

4

4

32

Engineering: Renewable Energy Technologies

4

4

27

Engineering: Hydrology and Water Resources Management

4

4

4

4

28

Information Technology

3

6

4

4

27

Information Technology ( Software Development or Web and Application Development)

3

6

4

4

27

Engineering: Logistics and Transportation Management A National Diploma/Diploma in either Civil Engineering (or Engineering Technology in Civil) or Management (both at NQF level 6)Relevant sufficient experience in the logistics and transportation sector PLUS any qualification at NQF level 6.  These applications will be considered individually by a panel of the CUT for admission.
Faculty of Health and Environmental Sciences

Programme

Minimum Level of Achievement in Subject

4(50-59%) | 3(40-49%) | 5(60-69%) | 6(70-79%)

Life Orientation will be given a score of 1 point. See Admission Points

Minimum  Points

M

ML

PS

LS

E

LO

L

A

AS

 

Agricultural Management

4

4

4

4

4

4

4

4

4

27

Agricultural Extension A National Diploma in Agricultural Management or an applicable 3-year national diploma (classified by SAQA as an M+3 qualification) in Agriculture is a prerequisite for the Advanced Diploma in Agricultural Extension qualification.
Biomedical Technology

4

4

4

4

4

28

Clinical Technology

4

4

4

4

4

30

Dental Assisting

4

4

4

27

Environmental Health

4

4

4

4

4

4

30

Radiography in Diagnostics

4

4

4

4

4

30

Somatology

4

4

4

4

27

See Also:  Univen APS: How to Calculate UNIVEN Admission Point Score 2023/2024
Faculty of Humanities

Programme

Minimum Level of Achievement in Subject

4(50-59%) | 3(40-49%) | 5(60-69%) | 6(70-79%)

Life Orientation will be given a score of 1 point. See Admission Points

Minimum  Points

M

ML

PS

LS

E

LO

L

A

 

Design and Studio Art

4

4

27

Studio Art Access to the Advanced Diploma in Design Technology qualification is open to learners in possession of a Diploma in Design and Studio Art or equivalent qualification
Design Technology Access to the Advanced Diploma in Design Technology qualification is open to learners in possession of a Diploma in Design and Studio Art or equivalent qualification
Language Practice and Media Studies

5

4

5

27

Teacher Education: Computer Science

4

4

4

4

6

27

Teacher Education: Economic and Management Sciences

4

4

4

4

6

27

Teacher Education: Languages

4

4

4

27

Teacher Education: Mathematics

4

4

4

27

Teacher Education: Natural Sciences

4

4

4

4

27

Teacher Education: Technology

4

4

4

4

27

Postgraduate Certificate in Education (PGCE) The applicant must hold at least a bachelor’s degree or three-year diploma evaluated at NQF level 6 (old structure) or NQF level 7 (new structure).
Education Management A four-year education degreeA three-year degree/diploma and a Post Graduate Certificate in Education (PGCE)
Faculty of Management Sciences

Programme

Minimum Level of Achievement in Subject

4(50-59%) | 3(40-49%) | 5(60-69%) | 6(70-79%)

Life Orientation will be given a score of 1 point. See Admission Points

Minimum  Points

E

LO

L

A

AS

E

BS

 

Business Administration

4

4

4

4

27

Community Development Work

4

27

Cost and Management Accounting

4

4

4

27

Financial Information Systems

4

4

5

27

Hospitality Management

4

4

27

Human Resources Management

4

4

27

Internal Auditing

4

4

4

27

Marketing

4

4

27

Office Management and Technology

4

4

27

Project Management

4

4

4

4

27

Public Management

4

4

27

Tourism Management

4

28

  • A candidate for a university of technology degree, diploma or certificate must be in possession of at least the NSC or equivalent qualification approved by Senate.
  • A candidate must score at least 27 or more points on the CUT scoring scale, for admission to CUT. (See the CUT scoring scale in section below for the appropriate weights according to which the above-mentioned totals are calculated.) However, admission to a particular programme is subject to the requirements of that programme (see section 4.1.5.8 below for the regulations pertaining to learning programmes).
  • Life Orientation forms part of the final score, with a maximum value of one.
  • A candidate is expected to possess a minimum level of proficiency in English, since this is the language of learning and teaching (LoLT) at CUT. A mark of 50% for English as Home Language (vernacular) or First Additional Language is therefore considered to be sufficient, although any proof of proficiency in the English language will also be taken into consideration.
  • If a candidate meets the minimum subject requirements for the certificate, diploma or degree, but scores fewer than the minimum points on the CUT scoring scale for the NSC examination, CUT will consider the following aspects:
  • There must be a place available for the candidate in the particular learning programme.
  • There must be a place available for the candidate in the particular learning programme.
  • If an applicant fails to qualify for admission to CUT in terms of these regulations, he/she may be subject to the testing of potential, refer to CUT calendar for more information.
See Also:  CUT Student Portal Login: student.cut.ac.za
Regulations pertaining to the testing of potential

The candidate must meet the necessary subject requirements for the learning programme in question.

The following measuring instruments are used to test the potential of a candidate:

  • RPL, with admission to be approved before a candidate may register;
  • Assessment of the prior experience of mature learners;
  • GSAT and English Proficiency Test results;
  • NSC results; and
  • Any other measuring instrument as determined by the Senate or Council.

The results of the above-mentioned measuring instruments are used in accordance with the following guidelines:

  • The results are arranged in sequence of achievement.
  • The best candidates are accepted in accordance with the need and vacancies in the specific learning programme.
  • A candidate who is not selected may be reconsidered at a subsequent selection opportunity, where the same procedures as those described above will be followed.
  • The candidate must deliver proof that he/she is able to express himself/herself well in English, both verbally and in writing, so that he/she can benefit fully from the learning programme of his/her choice. Some departments, however, set higher requirements with regard to language proficiency. A candidate will be offered a place in a postgraduate programme on condition that he/she possesses a minimum level of proficiency in English.

For candidates who completed the NSC in 2008 and thereafter, CUT awards academic weights for achievement according to the following scoring scale:

Percentage achieved in NSC subject

30 –

39%

40 –

49%

50 –

59%

60 –

69%

70 –

79%

80 –

89%

90 –

100%

Points rating for % value

2

3

4

5

6

7

8

Please note: A candidate scoring 21 points or less on CUT’s scoring scale will not be admitted. A candidate scoring 22 – 26 points on CUT’s scoring scale must undergo a selection test. A candidate must obtain an achievement level of at least 4 (50 – 59%) in Life Orientation in the NSC. Even if a higher mark is achieved in Life Orientation, the value will still only be awarded as 1 on the CUT scoring scale.

A candidate who scores fewer than 22 points on the CUT scoring scale in the July or subsequent NSC examination is considered to be a candidate who does not possess the necessary skills to successfully pursue a course of study at CUT under the prevailing circumstances. Such a candidate will not be admitted to CUT.

See Also:  DUT APS: How to Calculate DUT Admission Point Score 2023/2024

A candidate is expected to possess a minimum level of proficiency in English, as this is the LoLT at CUT. A mark of 50% for English as Home Language (vernacular) or First Additional Language is therefore considered to be sufficient, although any sufficient proof of proficiency in the English language will also be taken into consideration. In this regard, see section 4.1.5.4.6.3.4 above and the general language policy of CUT.

A candidate may be expected to attend an interview, undergo a selection test, and/or make a written presentation to the relevant Head of Department. Candidates who have not recently been engaged in study and who apply for admission to postgraduate studies are normally invited for such an interview or are requested to undergo a selection test and/or make a written presentation. No offer of admission to CUT will be made during such an interview or selection opportunity. Any offer of admission to CUT will be in writing, and will be mailed to the candidate.

Applications of foreign candidates are considered in accordance with the same regulations as those applicable to other candidates, provided that the foreign qualifications of such candidates are considered equivalent by the South African Qualifications Authority (SAQA). Foreign candidates must complete and submit an application form for international students, and must also meet any and all requirements that may be set for higher education studies in South Africa.

For candidates who matriculated in 2007 or before, CUT awards academic weights for achievement according to the following scoring scale:


Symbol obtained in subject in

Grade 12

Grade of subject in Grade 12

Higher Grade (HG)

Standard Grade (SG)

A 8 6
B 7 5
C 6 4
D 5 3
E 4 2
Since you have gotten the formula for calculating the Central University of Technology Admission Point Score, I will recommend you use an APS Calculator to get the best result. 
Further Readings: Central University of Technology List of Courses
Disclaimer: In order to be considered for selection for a program, the candidate is required to comply with the program’s minimum admission criteria in respect of the total APS as well as subject-specific requirements (as determined per program).

You can also check out the Central University of Technology, CUT admission/minimum entry requirements to get the specific requirement of the desired course and steps to apply.

Further Readings:
Don’t miss out on current updates, kindly like us on Facebook & follow us on  OR leave a comment below for further inquiries.

LEAVE A REPLY

Please enter your comment!
Please enter your name here